This Vibroplex model is known as the Presentation model which began production in 1948. The serial number of this key is 245410 which places this bug as being made in early 1966. According to the "Birth dates of Vibroplex keys" by John Elwood, WW7P, he states that in 1966 the following serial numbers were used 245,156 thru 249,440. The base has a chrome plated finish. On top of the chrome base is a brass plate that has a 24k gold plated finish. This 1966 Vibroplex Presentation was manufactured at 833 Broadway New York, NY.
The Vibroplex Presentation model was initially referred to as the "Super Deluxe" and was even treated as a separate Vibroplex model until 1979 when it lost its adjustable mainspring. The Super Deluxe model has jewel bearings, chrome plated base with a gold plated brass top plate, and an adjustable pendulum spring. The Vibroplex Super Deluxe model was the first bug to take advantage of John La Hiff's adjustable mainspring pendulum assembly which was patented in 1940 with patent number 2,187,351(see pic below). The adjustable mainspring pendulum assembly allowed the operator to control the speed of the bug by shortening or lengthening the pendulum spring.
A Vibroplex Presentation model made in 1948 can be seen HERE for comparison.
The Vibroplex company
Founded in 1905 in New York.
In 1907 Mr. Martin briefly moved the company to Norcross Georgia and sold his keys under the name of United Electric Mfg. Co.
By 1910 Vibroplex bugs were manufactured back in New York and were sold under the Vibroplex name and New York on the nameplate.
1979 the company went from New York to Portland, Maine.
In 1995 S. Felton Mitchell Jr., WA4OSR, purchased Vibroplex and moved the company to Mobile Alabama.
In 2009 Scott Robbins, W4PA purchased The Vibroplex Company and relocated it to Knoxville, Tennessee. Currently the company is located at 2906 Tazewell Pike, Suite A2B, Knoxville, TN 37918.
Vibroplex is the oldest continuously operating business in Amateur Radio. They were founded in New York in 1905 by Horace Martin, the inventor of the semi-automatic or "bug" Morse code key. After many years in New York and a handful of ownership changes over the 115 year period, Vibroplex has been operating in Knoxville, TN since 2009. Vibroplex keys are manufactured in the USA and they presently manufacture Morse code keys under the Vibroplex and Bencher brands. In addition Vibroplex manufacturers INRAD(International Radio) which is aftermarket crystal and roofing filters for use in transceivers and receivers from the 1960's to the present day. The company also supplies the OEM filters for the Elecraft K3S transceiver. In 2017 the company introduced the INRAD line of microphone and headset products. To complete a ham station the company also manufacturers the Par Endfedz antennas for both single and multi band operation.
With W7FG Vintage Manuals, Vibroplex creates reproduction manuals for vintage Amateur Radio, shortwave radio, scanners, audio and test equipment. They have 17,000 titles in stock for both service and operation manuals for equipment dating from the 1930's to the present day.
In addition, Vibroplex is the North American distributor for Spiderbeam, Easy-Rotor-Control, mAT-TUNER automatic antenna tuners, 4O3A Signature Products, and DXPatrol receivers.
If it comes from Vibroplex you known it has to be good! Although I personally prefer their pre Knoxville TN keys as the few that I have examined seem to be built with a touch better quality then their modern day equivalent.
Another way to look at Vibroplex is from a quote by S. Felton Mitchell Jr., WA4OSR, “The Vibroplex name is older than amateur radio and has come to represent the one piece of equipment in the ham shack that symbolizes the interest, camaraderie, and esprit de corps of the world-wide ham radio community.”
Where did the name “BUG” come from for this style of mechanical key?
Researching the subject I found a few references which I’ll list below and let the reader decide.
According to the Wiki Vibroplex page which anyone can edit and change it states: “The original device became known as a "bug", most likely due to the original logo, which showed an "electrified bug".
According to an article by Randy Cole which is found on the vibroplex collector website Mr. Cole states: “In those days a poor telegraph operator was called a “bug,” and some operators bought a key from Vibroplex or a competitor and started using it without much practice. The result was poor sending, and the keys themselves became known as “bugs.”
According to “The Origin of the Word Bug" by J. Casale W2NI found at the telegraph-history website.
The first use of the word Bug has its roots as a technical problem(false signals) heard on duplex and quadruplex telegraph circuits. Even Thomas Edison attempted to come up with an arrangement that rendered the false signals insignificant and named his new device a “Bug Trap”. By 1890, the term "bug" in the telegraph industry had evolved to describe a fault heard on multiple telegraphy systems and may have been used in others fields at this time as well.
The second meaning evolved from when the first semi-automatic keys appeared around 1904 or 1905, they were advertised and called transmitters. Some time around 1908 telegraphers started to call them by the nickname, "bug," because they sounded like one on a circuit. When telegraphers started using these new transmitters they naturally sent many errors. Their lack of experience and mis-adjustment of the transmitters sometimes resulted in excessive and "clipped" dots also causing what sounded like a "bug" on the circuit.
The article goes on to describe a court battle between The Vibroplex Co. and the J.H. Bunnell & Co. over the use of the word “Bug”. Very interesting and insightful reading that I highly recommend.
The book titled “The Telegraph Instructor” by G.M. Dodge dated 1911 states the following on page 50: “Bug in a wire – A slang phrase frequently used when a wire is in trouble”.
The book titled “The story of the key” by Louis Ramsey Moreau(SK) W3WRE copyright 1989 states the following on page 21: “The word bug as used on the wire during the late 19th and early 20th centuries was pure telegraphic profanity. To these men a bug was a lousy operator with a fist that only a mother could love.